Harden WireGuard VPN configuration

- Add IPv6 ip6tables rules to prevent IPv6 traffic leaks (forwarding was
  enabled but only IPv4 masquerade existed)
- Tighten FORWARD chain: only allow wg0→internet and established return,
  instead of blanket ACCEPT from wg0
- Scope NAT masquerade to VPN subnet only
- Block VPN clients from server-local services (SSH/80/443) via INPUT rules
- Set UFW DEFAULT_FORWARD_POLICY=ACCEPT (required for VPN routing; base
  hardening sets default deny which blocks forwarded packets)
- Add SaveConfig = false to prevent runtime state overwriting config
- Add reload ufw handler

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

phantom/playbooks/vpn/main.yml

@@ -18,3 +18,8 @@
 
     - name: Include WireGuard configuration tasks
       include_tasks: tasks/configure.yml
+
+  handlers:
+    - name: reload ufw
+      ufw:
+        state: reloaded

phantom/playbooks/vpn/tasks/configure.yml

@@ -24,13 +24,39 @@
     SERVER_PRIVKEY=$(cat /etc/wireguard/server_private.key)
     IFACE={{ primary_interface.stdout | trim }}
 
-    cat > /etc/wireguard/wg0.conf << EOF
+    cat > /etc/wireguard/wg0.conf << 'WGEOF'
     [Interface]
+    WGEOF
+
+    # Write dynamic values separately to avoid heredoc variable issues
+    cat >> /etc/wireguard/wg0.conf << EOF
     Address = {{ wg_subnet | regex_replace('/\\d+$', '') | regex_replace('\\.[0-9]+$', '.1/24') }}
     ListenPort = {{ wg_port }}
     PrivateKey = ${SERVER_PRIVKEY}
-    PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o ${IFACE} -j MASQUERADE
+    SaveConfig = false
-    PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o ${IFACE} -j MASQUERADE
+
+    # IPv4: forward VPN traffic to internet, masquerade source
+    PostUp = iptables -A FORWARD -i wg0 -o ${IFACE} -j ACCEPT
+    PostUp = iptables -A FORWARD -i ${IFACE} -o wg0 -m state --state RELATED,ESTABLISHED -j ACCEPT
+    PostUp = iptables -t nat -A POSTROUTING -o ${IFACE} -s {{ wg_subnet }} -j MASQUERADE
+    # IPv6: same rules to prevent leaks
+    PostUp = ip6tables -A FORWARD -i wg0 -o ${IFACE} -j ACCEPT
+    PostUp = ip6tables -A FORWARD -i ${IFACE} -o wg0 -m state --state RELATED,ESTABLISHED -j ACCEPT
+    PostUp = ip6tables -t nat -A POSTROUTING -o ${IFACE} -j MASQUERADE
+    # Block VPN clients from accessing server-local services (except DNS if local)
+    PostUp = iptables -I INPUT -i wg0 -p tcp --dport 22 -j DROP
+    PostUp = iptables -I INPUT -i wg0 -p tcp --dport 80 -j DROP
+    PostUp = iptables -I INPUT -i wg0 -p tcp --dport 443 -j DROP
+
+    PostDown = iptables -D FORWARD -i wg0 -o ${IFACE} -j ACCEPT
+    PostDown = iptables -D FORWARD -i ${IFACE} -o wg0 -m state --state RELATED,ESTABLISHED -j ACCEPT
+    PostDown = iptables -t nat -D POSTROUTING -o ${IFACE} -s {{ wg_subnet }} -j MASQUERADE
+    PostDown = ip6tables -D FORWARD -i wg0 -o ${IFACE} -j ACCEPT
+    PostDown = ip6tables -D FORWARD -i ${IFACE} -o wg0 -m state --state RELATED,ESTABLISHED -j ACCEPT
+    PostDown = ip6tables -t nat -D POSTROUTING -o ${IFACE} -j MASQUERADE
+    PostDown = iptables -D INPUT -i wg0 -p tcp --dport 22 -j DROP
+    PostDown = iptables -D INPUT -i wg0 -p tcp --dport 80 -j DROP
+    PostDown = iptables -D INPUT -i wg0 -p tcp --dport 443 -j DROP
 
     EOF
 
@@ -38,6 +64,7 @@
       CLIENT_PUBKEY=$(cat /etc/wireguard/clients/client${i}_public.key)
       CLIENT_PSK=$(cat /etc/wireguard/clients/client${i}_psk.key)
       cat >> /etc/wireguard/wg0.conf << EOF
+
     [Peer]
     # Client ${i}
     PublicKey = ${CLIENT_PUBKEY}

phantom/playbooks/vpn/tasks/install.yml

@@ -24,6 +24,19 @@
     sysctl_set: true
     reload: true
 
+- name: Set UFW default forward policy to accept (required for VPN routing)
+  lineinfile:
+    path: /etc/default/ufw
+    regexp: '^DEFAULT_FORWARD_POLICY='
+    line: 'DEFAULT_FORWARD_POLICY="ACCEPT"'
+  notify: reload ufw
+
+- name: Allow WireGuard port through UFW
+  ufw:
+    rule: allow
+    port: "{{ wg_port }}"
+    proto: udp
+
 - name: Generate server private key
   shell: wg genkey
   register: wg_server_privkey
@@ -46,9 +59,3 @@
   shell: "echo '{{ server_privkey_content.content | b64decode | trim }}' | wg pubkey"
   register: wg_server_pubkey
   changed_when: false
-
-- name: Allow WireGuard port through UFW
-  ufw:
-    rule: allow
-    port: "{{ wg_port }}"
-    proto: udp